Anycubic PETG Filament 1KG – Translucent Blue

Description

Translucent Blue PETG | 52±1 MPa tensile strength | 50-250 mm/s print speeds | Compatible with all FDM 3D printers | 1 kg net weight

Quick Specs

• Print in vivid Translucent Blue (#69B3E7) PETG for eye-catching, light-diffusing results
• Run it on all FDM 3D printers with a nozzle range of 230-250 ℃
• Print at speeds from 50 to 250 mm/s to suit quick drafts or finer work
• Rely on a tensile strength of 52±1 MPa for sturdy, functional parts
• Get 1 kg of PETG filament for projects big and small

Translucent Blue PETG for Makers Who Want Versatile Prints

The ANYCUBIC PETG Filament in Translucent Blue is made for hobbyists, designers and engineers who want a dependable PETG filament for everyday FDM 3D printing. The 1 kg net weight gives you plenty of material for everything from decorative models to practical, hard-working parts. Its Translucent Blue colour (#69B3E7) lets light pass through your prints, which suits lamp shades, covers, display pieces and prototypes where you want to see the shape and detail. Because it is listed as compatible with all FDM 3D printers, it slots into your existing setup without any need to change machines.

Strength and Stiffness You Can Measure

Functional prints need to do more than look good, and this PETG has the numbers to back up real-world use. It delivers a tensile strength of 52±1 MPa and a bending strength of 80±2 MPa, so brackets, enclosures and mechanical parts can handle everyday loads. A Young’s modulus of 1850±100 MPa and a bending modulus of 2000±50 MPa describe a stiff material, while an elongation at break of 13±1% means it has some give before it fails. An Izod impact strength of 45±2 kJ/m² (X-Y) shows how well it copes with sudden knocks.

Tired of Guessing Your Print Settings?

Dialling in a new filament can eat into your printing time, so ANYCUBIC publishes clear processing ranges to start from. Set your nozzle between 230-250 ℃ and your bed between 60-70 ℃, then print at speeds of 50-250 mm/s depending on how much detail or how much speed you need. The melt flow index of 25±3 g/10 min (measured at 250℃/2.16kg) gives you a useful reference for how the material flows when it is melted. With a density of 1.23 g/cm³, you also know what to expect from the material in terms of weight.

Heat Resistance and Proper Care

This PETG has a Vicat softening temperature of 72 ℃ and a heat deflection temperature of 69 ℃ (at 0.45 MPa), giving you clear limits to plan around when parts will sit near warm surfaces. To keep your filament printing at its best, the recommended drying settings are 55-65 °C for 6-8 hours before use. Following that routine helps you get the most from every 1 kg roll of ANYCUBIC PETG, whether you are printing one-off prototypes or a batch of useful household parts.

Features

• PETG filament in Translucent Blue (#69B3E7) for light-transmitting, eye-catching prints
• 1 kg net weight for extended printing across multiple projects
• Compatible with all FDM 3D printers
• Tensile strength of 52±1 MPa and bending strength of 80±2 MPa for durable functional parts
• Izod impact strength of 45±2 kJ/m² (X-Y) to cope with knocks and handling
• Nozzle temperature range of 230-250 ℃ and bed temperature range of 60-70 ℃
• Supports printing speeds from 50 to 250 mm/s
• Vicat softening temperature of 72 ℃ and heat deflection temperature of 69 ℃ (0.45 MPa)
• Clear drying guidance of 55-65 °C for 6-8 hours

Specifications

• Material Type: FDM Filament
• Filament Material: PETG
• Density: 1.23 g/cm³
• Melt Flow Index: 25±3 g/10 min (250℃/2.16kg)
• Tensile Strength: 52±1 MPa
• Young’s Modulus: 1850±100 MPa
• Elongation at Break: 13±1%
• Bending Strength: 80±2 MPa
• Bending Modulus: 2000±50 MPa
• Izod Impact Strength: 45±2 kJ/m² (X-Y)
• Melting Temperature: 130 ℃
• Vicat Softening Temperature: 72 ℃
• Heat Deflection Temperature: 69 ℃ (0.45 MPa)
• Nozzle Temperature Range: 230-250 ℃
• Bed Temperature Range: 60-70 ℃
• Printing Speed Range: 50-250 mm/s
• Drying Temperature & Time: 55-65 °C, 6-8 h
• Compatible Printers: All FDM 3D printers
• Colour: Translucent Blue (#69B3E7)
• Net Weight: 1 kg

What’s in the Box

• 1 x Anycubic PETG Filament 1KG – Translucent Blue

Why ANYCUBIC

Choose ANYCUBIC for a 3D Printer Materials with clearly documented capabilities and specifications, making it easier to select the right fit with confidence.